Product Carousel Tabs
Strainers
Rapid Sheet Dryer
This instrument rapid sheet dryer is used for drying the wet pulp
& paper samples before determining the dry wet or moisture
content. It is provided with flat heating elements. Stainless steel
sheet fabricated chamber with insulating material ensure long
service
& paper samples before determining the dry wet or moisture
content. It is provided with flat heating elements. Stainless steel
sheet fabricated chamber with insulating material ensure long
service
*Automatic temperature control device
*Digital temperature Indicator cum controller
*S.S Make hole body chamber size: 10″ x 12″
*Double walled insulated with glass wool mat,
*Temperature range: 300°C
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCRSD – 1012
*Digital temperature Indicator cum controller
*S.S Make hole body chamber size: 10″ x 12″
*Double walled insulated with glass wool mat,
*Temperature range: 300°C
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCRSD – 1012
SKU: *Model No: UCRSD - 1012
Strainers
Automatic Sheet Press
This instrument is used for pressing and de-watering of the hand
sheet quickly made on standard sheet making machine. Its must be
uniform pressure for the distribution of pulp across area
sheet quickly made on standard sheet making machine. Its must be
uniform pressure for the distribution of pulp across area
*Pneumatic sheet press control device
*Pressing time: 6-12 min adjustable
*Working pressure: 3.5 kg/cm2
*Size: 165mm, 200mm Squire
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCASP – 612
*Pressing time: 6-12 min adjustable
*Working pressure: 3.5 kg/cm2
*Size: 165mm, 200mm Squire
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCASP – 612
SKU: *Model No: UCASP - 612
Strainers
Digital Pulp Disintegrator
This instrument is used for standardized disintegration of pulp to a
homogeneous suspension required for preparation of laboratory hand heet
and other purpose. Pivoted drive unit with stainless steel propeller and
shaft. The propeller is driven by electric motor via stepped timing belt,
which ensure a direct without slippage.
Attachment:
homogeneous suspension required for preparation of laboratory hand heet
and other purpose. Pivoted drive unit with stainless steel propeller and
shaft. The propeller is driven by electric motor via stepped timing belt,
which ensure a direct without slippage.
Attachment:
*Mechanical preset impulse counter on front panel for setting
desired number of revolution.
*Digital predetermination preset pulse counter on front panel for
setting desired number of revolution.
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCPD – 2D
desired number of revolution.
*Digital predetermination preset pulse counter on front panel for
setting desired number of revolution.
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCPD – 2D
SKU: *Model No: UCPD - 2D
Strainers
Ash Incinerator
This instrument is used for determining the ash content in paper,
Paperboard and other cellulosic materials, by burning an exactly
weighed quantity, and by obtaining the weight percentage of the
remain
Paperboard and other cellulosic materials, by burning an exactly
weighed quantity, and by obtaining the weight percentage of the
remain
Range: 800 °C
*Attachment: Digital temperature indicator cum controller
with 4.5 digit SSD.
with 4.5 digit SSD.
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCAI – 800D
SKU: 5487FB8/41
Strainers
Paper Curl Tester
This instrument is used to measure the degree of curl when the paper
sample exposed, this method applies the principle of wetting one of the
paper and determining the maximum curvature or the time required to
reach maximum curvature the max. Curvature is an indication of relative
tendency of certain paper especially, to curl under normal of usage. The
time required to reach max. Curvature is measure of relative degree of
sizing such as secured with rosin.
sample exposed, this method applies the principle of wetting one of the
paper and determining the maximum curvature or the time required to
reach maximum curvature the max. Curvature is an indication of relative
tendency of certain paper especially, to curl under normal of usage. The
time required to reach max. Curvature is measure of relative degree of
sizing such as secured with rosin.
*Attachment: Template
*Model No: UCPCT – 90A
*Model No: UCPCT – 90A
SKU: *Model No: UCPCT - 90A
Strainers
Vibration Tester
This instrument is used for separating sieves and fiber flock from a
continuously fed pulp sample. Design approved by the technical section of the
British paper and board industry federation.
continuously fed pulp sample. Design approved by the technical section of the
British paper and board industry federation.
*Average capacity: 5kg dried pulp per hour.
*Stainer area: as per buyer requirement
*Screen slot: as per buyer requirement
*Attachment: Regulated speed controller
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCVT – 5A
*Stainer area: as per buyer requirement
*Screen slot: as per buyer requirement
*Attachment: Regulated speed controller
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCVT – 5A
SKU: *Model No: UCVT - 5A
Strainers
Digital Internal Ply Bond tester
This instrument is used for determining the internal bonding strength of
paper paperboard and laminates, by measuring the average energy, in
thousands of foot pound required to de-laminate the specimen in two
piles as described reference standard TAPPI T-569 The readings directly
indicate on Digital LCD Display. Take five samples for average reading
which will allow for variations of specimen thickness on the specimen
from 50 to 200 PSI
paper paperboard and laminates, by measuring the average energy, in
thousands of foot pound required to de-laminate the specimen in two
piles as described reference standard TAPPI T-569 The readings directly
indicate on Digital LCD Display. Take five samples for average reading
which will allow for variations of specimen thickness on the specimen
from 50 to 200 PSI
*Attachment: Double side adhesive tape width 25 mm
*Data transfer system Through RS 232
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCPBT – 5D
*Data transfer system Through RS 232
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCPBT – 5D
SKU: *Model No: UCPBT - 5D
Strainers
Puncture Tester
This tester used to measure the rigidity and resistance against puncture
due to impact of card board and other kinds of board used for packaging
containers. Damage caused to these materials by touching of solids like
projecting object etc, can be reproduced with similarity by means of this
tester. By performing both rigidity and puncture tester for specimens from
the same lot of we can determine the co-relation between tearing and
rigidity. Mechanically operated with five nos calibrated scales
due to impact of card board and other kinds of board used for packaging
containers. Damage caused to these materials by touching of solids like
projecting object etc, can be reproduced with similarity by means of this
tester. By performing both rigidity and puncture tester for specimens from
the same lot of we can determine the co-relation between tearing and
rigidity. Mechanically operated with five nos calibrated scales
*ModelNo:UCPT-1000A
SKU: *ModelNo:UCPT-1000A
Strainers
Rapid Sheet Dryer
This instrument rapid sheet dryer is used for drying the wet pulp
& paper samples before determining the dry wet or moisture
content. It is provided with flat heating elements. Stainless steel
sheet fabricated chamber with insulating material ensure long
service
& paper samples before determining the dry wet or moisture
content. It is provided with flat heating elements. Stainless steel
sheet fabricated chamber with insulating material ensure long
service
*Automatic temperature control device
*Digital temperature Indicator cum controller
*S.S Make hole body chamber size: 10″ x 12″
*Double walled insulated with glass wool mat,
*Temperature range: 300°C
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCRSD – 1012
*Digital temperature Indicator cum controller
*S.S Make hole body chamber size: 10″ x 12″
*Double walled insulated with glass wool mat,
*Temperature range: 300°C
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCRSD – 1012
SKU: *Model No: UCRSD - 1012
Strainers
Automatic Sheet Press
This instrument is used for pressing and de-watering of the hand
sheet quickly made on standard sheet making machine. Its must be
uniform pressure for the distribution of pulp across area
sheet quickly made on standard sheet making machine. Its must be
uniform pressure for the distribution of pulp across area
*Pneumatic sheet press control device
*Pressing time: 6-12 min adjustable
*Working pressure: 3.5 kg/cm2
*Size: 165mm, 200mm Squire
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCASP – 612
*Pressing time: 6-12 min adjustable
*Working pressure: 3.5 kg/cm2
*Size: 165mm, 200mm Squire
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCASP – 612
SKU: *Model No: UCASP - 612
Strainers
Digital Pulp Disintegrator
This instrument is used for standardized disintegration of pulp to a
homogeneous suspension required for preparation of laboratory hand heet
and other purpose. Pivoted drive unit with stainless steel propeller and
shaft. The propeller is driven by electric motor via stepped timing belt,
which ensure a direct without slippage.
Attachment:
homogeneous suspension required for preparation of laboratory hand heet
and other purpose. Pivoted drive unit with stainless steel propeller and
shaft. The propeller is driven by electric motor via stepped timing belt,
which ensure a direct without slippage.
Attachment:
*Mechanical preset impulse counter on front panel for setting
desired number of revolution.
*Digital predetermination preset pulse counter on front panel for
setting desired number of revolution.
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCPD – 2D
desired number of revolution.
*Digital predetermination preset pulse counter on front panel for
setting desired number of revolution.
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCPD – 2D
SKU: *Model No: UCPD - 2D
Strainers
Hand Sheet Former (SCA Model)
This instrument used for production of laboratory sheets for
physical tests. The design of the drainage system provides a
uniform flow across the entire wire, thus permitting an
exceptionally uniform sheets. Laboratory sheet prepared from
suspension of pulp are used for determining physical properties
such as apparent density, tensile index, tear index, folding
endurance light scattering coefficient and air resistance. The
conditions of sheet making should be similar to commercial
production.
physical tests. The design of the drainage system provides a
uniform flow across the entire wire, thus permitting an
exceptionally uniform sheets. Laboratory sheet prepared from
suspension of pulp are used for determining physical properties
such as apparent density, tensile index, tear index, folding
endurance light scattering coefficient and air resistance. The
conditions of sheet making should be similar to commercial
production.
*Model No: UCSF – SCA
SKU: *Model No: UCSF - SCA
Strainers
Freeness Tester (Schopper Reigler Type)
Freeness tester is intended for determining the drainage capability of beaten
pulp and is universally used to check the progress of the beating process and
confirm to the international Standard.
pulp and is universally used to check the progress of the beating process and
confirm to the international Standard.
SCAN-M3:65,lS:6213(Part iii).
Along with two measuring jar
*Model No: UCBFT – SR
Along with two measuring jar
*Model No: UCBFT – SR
SKU: *Model No: UCBFT - SR
Strainers
Freeness Tester (Canadian Type)
This instrument is used for determination of freeness of wood fibre ground wood
and mechanical pulp. It measures the Canadian freeness number which is a
measurement of the drainage capacity of different pulp types. It is useful index
of the amount of mechanical treatment given to the pulp With standard screen
plate and plexiglass measuring cylinder for CSF value. 3 gram of OD fibre pulp in
aqueous suspension is drained through the fibre mat on a standard perforated
screen plate during the test into a funnel provide with a bottom and side orifice
the filtrate collected in specially graduated measuring cylinder from the side
orifice is expressed as a CSF value corresponds to millilitre
and mechanical pulp. It measures the Canadian freeness number which is a
measurement of the drainage capacity of different pulp types. It is useful index
of the amount of mechanical treatment given to the pulp With standard screen
plate and plexiglass measuring cylinder for CSF value. 3 gram of OD fibre pulp in
aqueous suspension is drained through the fibre mat on a standard perforated
screen plate during the test into a funnel provide with a bottom and side orifice
the filtrate collected in specially graduated measuring cylinder from the side
orifice is expressed as a CSF value corresponds to millilitre
*Attachment: Two measuring jar
*Model No: UCBFT – CSF
*Model No: UCBFT – CSF
SKU: *Model No: UCBFT - CSF
Bestsellers
Smartphones
-
Strainers
Valley Beater
- *Net volume: 25 liter of 680 g bone-dry pulp at 2-2.5% concentration
*Operating voltage: 220 VAC, 50 Hz - An amount of the pulp corresponding to 360 gram of OD fiber is taken in a
tub is filled with 18 liter water and maintain the temperature as specified.
The lever is released to engaged bed plate and beater roll to beaten. The
beaten pulp is a standard specimen for the testing of the physical properties
of pulp. This instrument is for used for laboratory beating of pulp under
standardized condition. To determine the behavior of pulp when subject to
definite beating schedule. This beater is suitable for routine checking of in
laboratory. - *Model No: UCVB – 25
SKU: *Model No: UCVB - 25 - *Net volume: 25 liter of 680 g bone-dry pulp at 2-2.5% concentration
-
Strainers
Fibre Classifier (Baur Mc nett Type)
- 4.5 inch HD Touch Screen (1280 x 720)
- Android 4.4 KitKat OS
- 1.4 GHz Quad Core™ Processor
- 20 MP front and 28 megapixel CMOS rear camera
Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt.
SKU: FW511948218
SKU: FW511948218 -
Strainers
Rapid Sheet Dryer
- This instrument rapid sheet dryer is used for drying the wet pulp
& paper samples before determining the dry wet or moisture
content. It is provided with flat heating elements. Stainless steel
sheet fabricated chamber with insulating material ensure long
service - *Automatic temperature control device
*Digital temperature Indicator cum controller
*S.S Make hole body chamber size: 10″ x 12″
*Double walled insulated with glass wool mat,
*Temperature range: 300°C
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCRSD – 1012
SKU: *Model No: UCRSD - 1012 - This instrument rapid sheet dryer is used for drying the wet pulp
-
Strainers
Automatic Sheet Press
- This instrument is used for pressing and de-watering of the hand
sheet quickly made on standard sheet making machine. Its must be
uniform pressure for the distribution of pulp across area - *Pneumatic sheet press control device
*Pressing time: 6-12 min adjustable
*Working pressure: 3.5 kg/cm2
*Size: 165mm, 200mm Squire
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCASP – 612
SKU: *Model No: UCASP - 612 - This instrument is used for pressing and de-watering of the hand
Laptops & Computers
Strainers
Hand Sheet Former (SCA Model)
This instrument used for production of laboratory sheets for
physical tests. The design of the drainage system provides a
uniform flow across the entire wire, thus permitting an
exceptionally uniform sheets. Laboratory sheet prepared from
suspension of pulp are used for determining physical properties
such as apparent density, tensile index, tear index, folding
endurance light scattering coefficient and air resistance. The
conditions of sheet making should be similar to commercial
production.
physical tests. The design of the drainage system provides a
uniform flow across the entire wire, thus permitting an
exceptionally uniform sheets. Laboratory sheet prepared from
suspension of pulp are used for determining physical properties
such as apparent density, tensile index, tear index, folding
endurance light scattering coefficient and air resistance. The
conditions of sheet making should be similar to commercial
production.
*Model No: UCSF – SCA
SKU: *Model No: UCSF - SCA
Strainers
Freeness Tester (Schopper Reigler Type)
Freeness tester is intended for determining the drainage capability of beaten
pulp and is universally used to check the progress of the beating process and
confirm to the international Standard.
pulp and is universally used to check the progress of the beating process and
confirm to the international Standard.
SCAN-M3:65,lS:6213(Part iii).
Along with two measuring jar
*Model No: UCBFT – SR
Along with two measuring jar
*Model No: UCBFT – SR
SKU: *Model No: UCBFT - SR
Strainers
Freeness Tester (Canadian Type)
This instrument is used for determination of freeness of wood fibre ground wood
and mechanical pulp. It measures the Canadian freeness number which is a
measurement of the drainage capacity of different pulp types. It is useful index
of the amount of mechanical treatment given to the pulp With standard screen
plate and plexiglass measuring cylinder for CSF value. 3 gram of OD fibre pulp in
aqueous suspension is drained through the fibre mat on a standard perforated
screen plate during the test into a funnel provide with a bottom and side orifice
the filtrate collected in specially graduated measuring cylinder from the side
orifice is expressed as a CSF value corresponds to millilitre
and mechanical pulp. It measures the Canadian freeness number which is a
measurement of the drainage capacity of different pulp types. It is useful index
of the amount of mechanical treatment given to the pulp With standard screen
plate and plexiglass measuring cylinder for CSF value. 3 gram of OD fibre pulp in
aqueous suspension is drained through the fibre mat on a standard perforated
screen plate during the test into a funnel provide with a bottom and side orifice
the filtrate collected in specially graduated measuring cylinder from the side
orifice is expressed as a CSF value corresponds to millilitre
*Attachment: Two measuring jar
*Model No: UCBFT – CSF
*Model No: UCBFT – CSF
SKU: *Model No: UCBFT - CSF
Strainers
Drop Tester
The contact angle between air, water and paper is the static angle between
the water air interface and the water paper interface measured as
specifiedon a drop of water which has been placed on the surface of the
paper. Water drop tester or surface wettability tester (STFI Type) for
determining the contact angle of liquid drop of water, oil wetting agent &
size for corrugated fiber board.
the water air interface and the water paper interface measured as
specifiedon a drop of water which has been placed on the surface of the
paper. Water drop tester or surface wettability tester (STFI Type) for
determining the contact angle of liquid drop of water, oil wetting agent &
size for corrugated fiber board.
*Projection screen of matt glass 160x90mm magnification 25X.
*Adjustable height: up to 2000mm
*Model No: UCDT – 200ST
*Adjustable height: up to 2000mm
*Model No: UCDT – 200ST
SKU: *Model No: UCDT - 200ST
Strainers
Hot Air Oven
This instrument Hot air oven is used for moisture determination of pulp,
paper & paperboard etc
paper & paperboard etc
*With digital temperature indicator cum controller
*Inner chamber Size: 18″ x 18″ x 18″ (Available in other size)
*Inner chamber made by stainless steel.
*Temperature range: 10°C – 250°C
*Accuracy: + /- 1 %
*Temperature control: Digital Controller
*Power rating: 350 Watt.
*Model No: UCHAO – 250D
*Inner chamber Size: 18″ x 18″ x 18″ (Available in other size)
*Inner chamber made by stainless steel.
*Temperature range: 10°C – 250°C
*Accuracy: + /- 1 %
*Temperature control: Digital Controller
*Power rating: 350 Watt.
*Model No: UCHAO – 250D
SKU: *Model No: UCHAO - 250D
Strainers
Valley Beater
*Net volume: 25 liter of 680 g bone-dry pulp at 2-2.5% concentration
*Operating voltage: 220 VAC, 50 Hz
*Operating voltage: 220 VAC, 50 Hz
An amount of the pulp corresponding to 360 gram of OD fiber is taken in a
tub is filled with 18 liter water and maintain the temperature as specified.
The lever is released to engaged bed plate and beater roll to beaten. The
beaten pulp is a standard specimen for the testing of the physical properties
of pulp. This instrument is for used for laboratory beating of pulp under
standardized condition. To determine the behavior of pulp when subject to
definite beating schedule. This beater is suitable for routine checking of in
laboratory.
tub is filled with 18 liter water and maintain the temperature as specified.
The lever is released to engaged bed plate and beater roll to beaten. The
beaten pulp is a standard specimen for the testing of the physical properties
of pulp. This instrument is for used for laboratory beating of pulp under
standardized condition. To determine the behavior of pulp when subject to
definite beating schedule. This beater is suitable for routine checking of in
laboratory.
*Model No: UCVB – 25
SKU: *Model No: UCVB - 25
Strainers
Digital Bursting Strength Tester (Pneumatic Type)
This instrument is used for determining the Bursting Strength of Paper
The pressure is produced by electric motor and gear mechanisms.
Specimen is clamped between two concentric plates by pneumatic
clamping. Uniform pressure is produced and the plunger back to reverse
automatically after rupture and saves testing time and increases
diaphragm life. The bursting pressure, at the time of rupture is recorded
on a sensitive pressure transmitter.
The pressure is produced by electric motor and gear mechanisms.
Specimen is clamped between two concentric plates by pneumatic
clamping. Uniform pressure is produced and the plunger back to reverse
automatically after rupture and saves testing time and increases
diaphragm life. The bursting pressure, at the time of rupture is recorded
on a sensitive pressure transmitter.
*Single head pneumatic clamping *Capacity: 35 Kg/cm2
*Power required: 220 VAC, 50
*Data transfer system through RS 232
*Power required: 220 VAC, 50
*Data transfer system through RS 232
*Model No: UCBST- 728DMPN
SKU: *Model No: UCBST- 728DMPN
Laptops & Computers
Smartphones
Recently Viewed
Strainers
Valley Beater
*Net volume: 25 liter of 680 g bone-dry pulp at 2-2.5% concentration
*Operating voltage: 220 VAC, 50 Hz
*Operating voltage: 220 VAC, 50 Hz
An amount of the pulp corresponding to 360 gram of OD fiber is taken in a
tub is filled with 18 liter water and maintain the temperature as specified.
The lever is released to engaged bed plate and beater roll to beaten. The
beaten pulp is a standard specimen for the testing of the physical properties
of pulp. This instrument is for used for laboratory beating of pulp under
standardized condition. To determine the behavior of pulp when subject to
definite beating schedule. This beater is suitable for routine checking of in
laboratory.
tub is filled with 18 liter water and maintain the temperature as specified.
The lever is released to engaged bed plate and beater roll to beaten. The
beaten pulp is a standard specimen for the testing of the physical properties
of pulp. This instrument is for used for laboratory beating of pulp under
standardized condition. To determine the behavior of pulp when subject to
definite beating schedule. This beater is suitable for routine checking of in
laboratory.
*Model No: UCVB – 25
SKU: *Model No: UCVB - 25
Strainers
Fibre Classifier (Baur Mc nett Type)
4.5 inch HD Touch Screen (1280 x 720)
Android 4.4 KitKat OS
1.4 GHz Quad Core™ Processor
20 MP front and 28 megapixel CMOS rear camera
Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt.
SKU: FW511948218
SKU: FW511948218
Strainers
Rapid Sheet Dryer
This instrument rapid sheet dryer is used for drying the wet pulp
& paper samples before determining the dry wet or moisture
content. It is provided with flat heating elements. Stainless steel
sheet fabricated chamber with insulating material ensure long
service
& paper samples before determining the dry wet or moisture
content. It is provided with flat heating elements. Stainless steel
sheet fabricated chamber with insulating material ensure long
service
*Automatic temperature control device
*Digital temperature Indicator cum controller
*S.S Make hole body chamber size: 10″ x 12″
*Double walled insulated with glass wool mat,
*Temperature range: 300°C
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCRSD – 1012
*Digital temperature Indicator cum controller
*S.S Make hole body chamber size: 10″ x 12″
*Double walled insulated with glass wool mat,
*Temperature range: 300°C
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCRSD – 1012
SKU: *Model No: UCRSD - 1012
Strainers
Automatic Sheet Press
This instrument is used for pressing and de-watering of the hand
sheet quickly made on standard sheet making machine. Its must be
uniform pressure for the distribution of pulp across area
sheet quickly made on standard sheet making machine. Its must be
uniform pressure for the distribution of pulp across area
*Pneumatic sheet press control device
*Pressing time: 6-12 min adjustable
*Working pressure: 3.5 kg/cm2
*Size: 165mm, 200mm Squire
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCASP – 612
*Pressing time: 6-12 min adjustable
*Working pressure: 3.5 kg/cm2
*Size: 165mm, 200mm Squire
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCASP – 612
SKU: *Model No: UCASP - 612
Strainers
Digital Pulp Disintegrator
This instrument is used for standardized disintegration of pulp to a
homogeneous suspension required for preparation of laboratory hand heet
and other purpose. Pivoted drive unit with stainless steel propeller and
shaft. The propeller is driven by electric motor via stepped timing belt,
which ensure a direct without slippage.
Attachment:
homogeneous suspension required for preparation of laboratory hand heet
and other purpose. Pivoted drive unit with stainless steel propeller and
shaft. The propeller is driven by electric motor via stepped timing belt,
which ensure a direct without slippage.
Attachment:
*Mechanical preset impulse counter on front panel for setting
desired number of revolution.
*Digital predetermination preset pulse counter on front panel for
setting desired number of revolution.
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCPD – 2D
desired number of revolution.
*Digital predetermination preset pulse counter on front panel for
setting desired number of revolution.
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCPD – 2D
SKU: *Model No: UCPD - 2D
Strainers
Hand Sheet Former (SCA Model)
This instrument used for production of laboratory sheets for
physical tests. The design of the drainage system provides a
uniform flow across the entire wire, thus permitting an
exceptionally uniform sheets. Laboratory sheet prepared from
suspension of pulp are used for determining physical properties
such as apparent density, tensile index, tear index, folding
endurance light scattering coefficient and air resistance. The
conditions of sheet making should be similar to commercial
production.
physical tests. The design of the drainage system provides a
uniform flow across the entire wire, thus permitting an
exceptionally uniform sheets. Laboratory sheet prepared from
suspension of pulp are used for determining physical properties
such as apparent density, tensile index, tear index, folding
endurance light scattering coefficient and air resistance. The
conditions of sheet making should be similar to commercial
production.
*Model No: UCSF – SCA
SKU: *Model No: UCSF - SCA
Strainers
Freeness Tester (Schopper Reigler Type)
Freeness tester is intended for determining the drainage capability of beaten
pulp and is universally used to check the progress of the beating process and
confirm to the international Standard.
pulp and is universally used to check the progress of the beating process and
confirm to the international Standard.
SCAN-M3:65,lS:6213(Part iii).
Along with two measuring jar
*Model No: UCBFT – SR
Along with two measuring jar
*Model No: UCBFT – SR
SKU: *Model No: UCBFT - SR
Strainers
Freeness Tester (Canadian Type)
This instrument is used for determination of freeness of wood fibre ground wood
and mechanical pulp. It measures the Canadian freeness number which is a
measurement of the drainage capacity of different pulp types. It is useful index
of the amount of mechanical treatment given to the pulp With standard screen
plate and plexiglass measuring cylinder for CSF value. 3 gram of OD fibre pulp in
aqueous suspension is drained through the fibre mat on a standard perforated
screen plate during the test into a funnel provide with a bottom and side orifice
the filtrate collected in specially graduated measuring cylinder from the side
orifice is expressed as a CSF value corresponds to millilitre
and mechanical pulp. It measures the Canadian freeness number which is a
measurement of the drainage capacity of different pulp types. It is useful index
of the amount of mechanical treatment given to the pulp With standard screen
plate and plexiglass measuring cylinder for CSF value. 3 gram of OD fibre pulp in
aqueous suspension is drained through the fibre mat on a standard perforated
screen plate during the test into a funnel provide with a bottom and side orifice
the filtrate collected in specially graduated measuring cylinder from the side
orifice is expressed as a CSF value corresponds to millilitre
*Attachment: Two measuring jar
*Model No: UCBFT – CSF
*Model No: UCBFT – CSF
SKU: *Model No: UCBFT - CSF
Strainers
Drop Tester
The contact angle between air, water and paper is the static angle between
the water air interface and the water paper interface measured as
specifiedon a drop of water which has been placed on the surface of the
paper. Water drop tester or surface wettability tester (STFI Type) for
determining the contact angle of liquid drop of water, oil wetting agent &
size for corrugated fiber board.
the water air interface and the water paper interface measured as
specifiedon a drop of water which has been placed on the surface of the
paper. Water drop tester or surface wettability tester (STFI Type) for
determining the contact angle of liquid drop of water, oil wetting agent &
size for corrugated fiber board.
*Projection screen of matt glass 160x90mm magnification 25X.
*Adjustable height: up to 2000mm
*Model No: UCDT – 200ST
*Adjustable height: up to 2000mm
*Model No: UCDT – 200ST
SKU: *Model No: UCDT - 200ST
Strainers
Abrasion Tester
Designed determine the wear and durability of paper, paperboard
ceramics, plastic, textile, rubber, flooring, and painted lacquered and
electroplated surfaces. Electrically driven with predetermined digital
cycle. Counter selections between 1 to 99,999 with vacuum dust
extractors.
ceramics, plastic, textile, rubber, flooring, and painted lacquered and
electroplated surfaces. Electrically driven with predetermined digital
cycle. Counter selections between 1 to 99,999 with vacuum dust
extractors.
*With single abraser unit
*With double independent abraser units.
44.5 digit SSD counter
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCAT – 1000D
*With double independent abraser units.
44.5 digit SSD counter
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCAT – 1000D
SKU: *Model No: UCAT - 1000D
Strainers
Puncture Tester
This tester used to measure the rigidity and resistance against puncture
due to impact of card board and other kinds of board used for packaging
containers. Damage caused to these materials by touching of solids like
projecting object etc, can be reproduced with similarity by means of this
tester. By performing both rigidity and puncture tester for specimens from
the same lot of we can determine the co-relation between tearing and
rigidity. Mechanically operated with five nos calibrated scales
due to impact of card board and other kinds of board used for packaging
containers. Damage caused to these materials by touching of solids like
projecting object etc, can be reproduced with similarity by means of this
tester. By performing both rigidity and puncture tester for specimens from
the same lot of we can determine the co-relation between tearing and
rigidity. Mechanically operated with five nos calibrated scales
*ModelNo:UCPT-1000A
SKU: *ModelNo:UCPT-1000A
Strainers
Digital Internal Ply Bond Tester
This instrument is used for determining the internal bonding strength of
paper paperboard and laminates, by measuring the average energy, in
thousands of foot pound required to de-laminate the specimen in two
piles as described reference standard TAPPI T-569. The readings directly
indicate on digital LCD display. Take five samples for average reading
which will allow for variations of specimen thickness on the specimen
from 50 to 200 PSI
paper paperboard and laminates, by measuring the average energy, in
thousands of foot pound required to de-laminate the specimen in two
piles as described reference standard TAPPI T-569. The readings directly
indicate on digital LCD display. Take five samples for average reading
which will allow for variations of specimen thickness on the specimen
from 50 to 200 PSI
*Attachment: Double side adhesive tape width 25 mm
*Operating voltage: 220 VAC, 50 Hz
*Data transfer system through RS 232
*Model No: UCPBT – 5DM
*Power required: 220 VAC, 50 Hz
*Model No: UCBST- 30DHP
*Operating voltage: 220 VAC, 50 Hz
*Data transfer system through RS 232
*Model No: UCPBT – 5DM
*Power required: 220 VAC, 50 Hz
*Model No: UCBST- 30DHP
SKU: *Model No: UCBST- 30DHP
Strainers
Vibration Tester
This instrument is used for separating sieves and fiber flock from a
continuously fed pulp sample. Design approved by the technical section of the
British paper and board industry federation.
continuously fed pulp sample. Design approved by the technical section of the
British paper and board industry federation.
*Average capacity: 5kg dried pulp per hour.
*Stainer area: as per buyer requirement
*Screen slot: as per buyer requirement
*Attachment: Regulated speed controller
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCVT – 5A
*Stainer area: as per buyer requirement
*Screen slot: as per buyer requirement
*Attachment: Regulated speed controller
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCVT – 5A
SKU: *Model No: UCVT - 5A
Strainers
Scuff Tester
*Digital read out for disc rotation,
*Over load protection.
*Mechanical structure: Mild steel
*4.5 digit SSD counter
*Bearing housing: Chrome plated brass
*Operating voltage: 220 VAC, 50 Hz
*Over load protection.
*Mechanical structure: Mild steel
*4.5 digit SSD counter
*Bearing housing: Chrome plated brass
*Operating voltage: 220 VAC, 50 Hz
To measure the rub proof ness of printed paper, carton package & board
by applied contact pressure. Two contact disc rotate in contact at same
angular speed, giving contact relative velocity between all points of the
disc with interchangeable dead weight and electrically driven system.
by applied contact pressure. Two contact disc rotate in contact at same
angular speed, giving contact relative velocity between all points of the
disc with interchangeable dead weight and electrically driven system.
*Model No: UCST -10000D
SKU: *Model No: UCST -10000D
Strainers
Internal Ply Bond Tester (Scott Type)
The instrument designed for determining the internal bonding strength of paper
paperboard and laminates etc, by measuring the average energy, in thousands of
foot pound required to de-laminate the specimen in two piles as described
reference standard TAPPI T-569. Dual capacity pendulum of 0-0.25 FT/LB and 0.1-
0.5 Ft/Lb. readings directly on calibrated scale. The five number specimen
preparation unit which will allow for variations of specimen thickness, with
different clamping pressure on the specimen from 50 to 200 PSI
paperboard and laminates etc, by measuring the average energy, in thousands of
foot pound required to de-laminate the specimen in two piles as described
reference standard TAPPI T-569. Dual capacity pendulum of 0-0.25 FT/LB and 0.1-
0.5 Ft/Lb. readings directly on calibrated scale. The five number specimen
preparation unit which will allow for variations of specimen thickness, with
different clamping pressure on the specimen from 50 to 200 PSI
*Attachment: Standard calibration sliding weight with sample holder.
*Double side adhesive tape width 25 mm
*ModelNo:UCPBT-5A
*Double side adhesive tape width 25 mm
*ModelNo:UCPBT-5A
*Power required: 220 VAC, 50 Hz
*Model No: UCBST- 30DH
*Model No: UCBST- 30DH
SKU: *Model No: UCBST- 30DH
Strainers
Digital Core Collapse Tester
This instrument is used for measuring the crush strength of paper core. This is
the high quality core collapse tester is intended for testing crush strength of
core. It is expected to be an excellent alternative for all customer. The tester
consist of a mechanical stress system with greatest accuracy having two
stress jaws of which the one is movable and the lower one is firm and
connected to load cell.
the high quality core collapse tester is intended for testing crush strength of
core. It is expected to be an excellent alternative for all customer. The tester
consist of a mechanical stress system with greatest accuracy having two
stress jaws of which the one is movable and the lower one is firm and
connected to load cell.
1*Capacity: 500 Kg
*Data transfer system through RS 232
*Power required: 220 VAC, 50 Hz
*Model No: UCCCT – 500DM
*Data transfer system through RS 232
*Power required: 220 VAC, 50 Hz
*Model No: UCCCT – 500DM
SKU: *Model No: UCCCT - 500DM