Strainers
Showing 1–24 of 44 results
-
Strainers
Lab Mechanical Crusher
- For preparation of wood meal, wood samples for chemical analysis and
grinding virtually any material to produce a finely meshed sample. - Four blade rotor dia 200mm operating at 400 to 800 rpm.
- Interchangeable screen mesh available as per requirement.
- *Operating voltage: 220 VAC, 50 Hz
- *Model No: UCLMC – 200
SKU: *Model No: UCLMC - 200 - For preparation of wood meal, wood samples for chemical analysis and
-
Strainers
Tearing Resistance Tester (Elmendorff Type)
- This instrument is used for measuring the tensile of paper, Paper board, plastic
& film. This is the high quality tensile tester is intended for testing tensile
strength in printing. It is expected to be an excellent alternative for all customer
The tensile tester consist of a mechanical strain system with greatest accuracy
having two strain jaws of which the top one is firm and the lower one is movable
and connected to a load cell. - *Capacity: 200 Newton.
*Microprocessor based
*Digital read out for tensile strength, *Tensile force
*Breaking length *Elongation.
*Data transfer system Through RS 232
*Operating voltage: 220 VAC, 50 Hz *Model No: UCTT – 200DM
SKU: 5487FB8/44 - This instrument is used for measuring the tensile of paper, Paper board, plastic
-
Strainers
Digital Internal Ply Bond tester
- This instrument is used for determining the internal bonding strength of
paper paperboard and laminates, by measuring the average energy, in
thousands of foot pound required to de-laminate the specimen in two
piles as described reference standard TAPPI T-569 The readings directly
indicate on Digital LCD Display. Take five samples for average reading
which will allow for variations of specimen thickness on the specimen
from 50 to 200 PSI - *Attachment: Double side adhesive tape width 25 mm
*Data transfer system Through RS 232
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCPBT – 5D
SKU: *Model No: UCPBT - 5D - This instrument is used for determining the internal bonding strength of
-
Strainers
Paper Curl Tester
- This instrument is used to measure the degree of curl when the paper
sample exposed, this method applies the principle of wetting one of the
paper and determining the maximum curvature or the time required to
reach maximum curvature the max. Curvature is an indication of relative
tendency of certain paper especially, to curl under normal of usage. The
time required to reach max. Curvature is measure of relative degree of
sizing such as secured with rosin. - *Attachment: Template
*Model No: UCPCT – 90A
SKU: *Model No: UCPCT - 90A - This instrument is used to measure the degree of curl when the paper
-
Strainers
Ash Incinerator
- This instrument is used for determining the ash content in paper,
Paperboard and other cellulosic materials, by burning an exactly
weighed quantity, and by obtaining the weight percentage of the
remain - Range: 800 °C
- *Attachment: Digital temperature indicator cum controller
with 4.5 digit SSD. - *Operating voltage: 220 VAC, 50 Hz
- *Model No: UCAI – 800D
SKU: 5487FB8/41 - This instrument is used for determining the ash content in paper,
-
Strainers
Internal Ply Bond Tester (Scott Type)face Oil Absorbency Tester (Pira Type)
- The instrument designed for determining the internal bonding strength
of paper paperboard and laminates etc, by measuring the average
energy in thousands of foot pound required to de-laminate the specimen
in two piles as described reference standard TAPPI T-569 Dual capacity
pendulum of 0-0.25 FT/LB and 0.1-0.5 Ft/Lb. Readings directly on
calibrated scale. The five number specimen preparation unit which will
allow for variations of specimen thicknesses, with different clamping
pressure on the specimenfrom 50 to 200 PSI - Attachment: *Standard calibration sliding weight with sample holder
- *Double side adhesive tape width 25 mm
*ModelNo:UCPBT-5A
SKU: *ModelNo:UCPBT-5A - The instrument designed for determining the internal bonding strength
-
Strainers
Muffle Furnance
- This instrument is used for incineration of solids
- *Temperature range: upto 1000 °C
*Working temperature: 900 °C.
* Temperature controlled by energy regulator.
*Complete with Pyrometer and Thermocouple.
*Option: With digital temperature indicator-cum-controller
*Operating voltage: 220 VAC, 50 Hz.
*Model No: UCMF – 1000D
SKU: *Model No: UCMF - 1000D -
Strainers
Moisture Meter (Delmhorst)
- This moisture meter is especially useful for testing paperboard,
corrugated stock and paper tubes. Micro controller-based
circuit for greater accuracy and reliability. - Three scales:
- 4.3%-18% for paper
5%-40% for baled scrap paper
Model No: P – 2000
SKU: Model No: P - 2000 - This moisture meter is especially useful for testing paperboard,
-
Strainers
Cobb Tester (Tilting Type)
- This instrument is used for determining the water absorbency of paper,
paperboard and similar material. The water absorbency of paper (the cobb
value) is defined as the Quantity of water absorbed in a given time by one
side of a unit area of paper or paperboard placed horizontally under a head
of one centimeter of water. - A. Automatic clamping type
B. Tilting type - *Option: 4.5 digit SSD self started timer
*Model No: UCCT – 60A
SKU: *Model No: UCCT - 60A - This instrument is used for determining the water absorbency of paper,
-
Strainers
Paper Surface Oil Absorbency Tester (Pira Type)
- This instrument is used for determining the oil absorption of the surface of
paper and paperboard with Electronic self starting timer. A specimen is
placed on a inclined plane surface covered with rubber offset blanket, the
standard oil drops on brass roller and is rolled against the rubber blanket
and the oil film on brass roller is transferred to the specimen surface. The
oil absorption time is measured in second.
Attachment: *Electronic self starting timer for time measurement of
absorption time in seconds - *Measuring range: 4.5 digit SSD Timer
*Operating voltage: 220 VAC, 50 Hz
*Model No: UCSOA – 9999D
SKU: 5487FB8/38 - This instrument is used for determining the oil absorption of the surface of
-
Strainers
Water Absorption Tester
- This apparatus used for determination or water rising through capillary
having width of 15mm & the length is 300mm. To measure
the length of rising water with respect to time taken. - *Mechanical structure made by stainless steel
*Water tray made by stainless steel
*capillary scales made by stainless steel
*Model No: UCWAT – 415A
SKU: *Model No: UCWAT - 415A - This apparatus used for determination or water rising through capillary
-
Strainers
B.O.D. Incubator
- Most versatile for bio chemical oxygen demand determinations castor wheel
mounted cabinet is double walled with inner chamber S.S. And outer wall of
M.S. Sheet duly powder coated. The gap of 75mm between the outer and
the inner wall is fitted with special grade glass wool to prevent thermal
losses. Triple walled back of the unit is fitted with two air circulating fans for
maintaining temperature uniformity through out the chamber, Fully view
inner glass acrylic door permits inspection of specimens, without disturbing
the same. Lock and key arrangement is provided in the double walled outer
door Unit is fitted with door operated illumination lamp inside the chamber. - Refrigeration unit is formed by ISI marked
- *Operating voltage: 220 VAC, 50 Hz.
*Model No: UCBOD – 4D
SKU: *Model No: UCBOD - 4D - Most versatile for bio chemical oxygen demand determinations castor wheel
-
Strainers
Humidity Tester
- This instrument is used for sample of paper or paperboard is conditioned
and said to be equilibrium with the conditioning atmosphere when it has
been exposed to the atmosphere long enough for the result of two weighing
of test pieces preformed at an interval of one hour - *Inner chamber size: 4 cu. Fit.
*Inner chamber made by stainless steel.
*Dimensions: 18″x 24″ - Temperature range: 10°C – 60°C
*Accuracy: + /- 0.5 %
*Operating voltage: 220 VAC, 50 Hz.
*Model No: UCHT – 460D
SKU: *Model No: UCHT - 460D - This instrument is used for sample of paper or paperboard is conditioned
-
Strainers
QUADRANT SCALE
- Incredibly sharp picture and zoomThis Instrument is used for measuring the basis weight (GSM) of
paper and other sheet materials by weighing a small test sample
with given dimensions. The scale are calibrated to precision dead
weight. This accuracy is maintained as long as the pendulum
returns to its original
form and is kept free from corrosion, distortion, other causes, which
may affect its weight and balance. - 0-125, 0-250, 0-500 GSM,
- Accuracy: 1 GSM
Suitable for different size of paper
10×10, 20×20, 20×25, 25×25, 25×40,
Model No: UCQS- 500
SKU: 5487FB8/33 - Incredibly sharp picture and zoomThis Instrument is used for measuring the basis weight (GSM) of
-
Strainers
DIGITAL GSM TESTER
- This Instrument is used for measuring the basis weight (GSM) of
paper and other sheets materials by weighing a small test sample
with given dimensions. Digital DPM are showing direct GSM. This
accuracy is maintained through load cell, or other causes, which may
affect its weight.
Capacity: 0-1000, 0-2000 GSM - Accuracy: 0.2 GSM
Suitable for different size of paper 10×10, 20×20, 20×25,
25×25, 25x40cm
Power required: 220 VAC, 50 Hz
Model No: UCGT-1000D
SKU: Model No: UCGT-1000D - This Instrument is used for measuring the basis weight (GSM) of
-
Strainers
Digital Bursting Strength Tester (Mullen Type)
- This instrument is used for determining the Bursting Strength of Paper
The pressure is produced by electric motor and gear mechanisms.
Specimen is clamped between two concentric plates by pneumatic
clamping. Uniform pressure is produced and the plunger back to reverse
automatically after rupture and saves testing time and increases
diaphragm life. The bursting pressure, at the time of rupture is recorded
on a sensitive pressure transmitter. - *Single head pneumatic clamping *Capacity: 21 Kg/cm2
*Power required: 220 VAC, 50
*Data transfer system through RS 232 - *Model No: UCBST- 721DM
SKU: *Model No: UCBST- 721DM - This instrument is used for determining the Bursting Strength of Paper
-
Strainers
Digital Bursting Strength Tester (Pneumatic Type)
- This instrument is used for determining the Bursting Strength of Paper
The pressure is produced by electric motor and gear mechanisms.
Specimen is clamped between two concentric plates by pneumatic
clamping. Uniform pressure is produced and the plunger back to reverse
automatically after rupture and saves testing time and increases
diaphragm life. The bursting pressure, at the time of rupture is recorded
on a sensitive pressure transmitter. - *Single head pneumatic clamping *Capacity: 35 Kg/cm2
*Power required: 220 VAC, 50
*Data transfer system through RS 232 - *Model No: UCBST- 728DMPN
SKU: *Model No: UCBST- 728DMPN - This instrument is used for determining the Bursting Strength of Paper
-
Strainers
Stiffness Tester (Taber Type)
- This instrument used to measure the stiffness of paper, card board,
plastic, light metal sheet, foil & other flexible material. A test piece
easily clamp from one side. To determine the maximum force by lower
end clamp on a rotating disc then specimen is bent by 50 degree at a
constant speed. The stiffness of the material is determined by rotation
are clock wise and anti clock wise. So that average stiffness can be
measured in both directions - *Range: 0 – 5000 Taber stiffness unit
- *Range: 0 – 5000 Taber stiffness unit
- *Cabinet structure: Aluminium
- *Attachment: Triple shear cutter for specimen prepration
- *Power required: 220 VAC, 50 Hz
- *ModelNo:UCST-5000T
SKU: *ModelNo:UCST-5000T - This instrument used to measure the stiffness of paper, card board,
-
Strainers
Electronic Stiffness Tester
- This instrument used to measure the stiffness of paper board by determining
the bending resistance in gram force necessary to deflect by the motor end of
38 mm wide horizontally clamped specimen with six preset test length (i.e
5,10,15,20, 25 & 50 mm). The bending angle setting up to 90 degree. - *Digital read out for Bending Force,
- *Range: 0 – 10000mN *Mechanical structure: Aluminium
- *Load Cell: Max load *Cabinet structure: Aluminium
- *Attachment: Triple shear cutter for specimen prepration
- *Data transfer system through RS 232
- *Power required: 220 VAC, 50 Hz
- *ModelNo:UCST-10000D
SKU: *ModelNo:UCST-10000D - This instrument used to measure the stiffness of paper board by determining
-
Strainers
Digital Box compression Tester
- This high quality compression strength tester is intended for testing
packaging it is expected to be an excellent alternative for all customer for
which a crush tester is to small and a conventional compression tester too
large and especially, too expensive. The compression tester consist of a
mechanical press with greatest accuracy having two compress platens of
which the lower one is firm and the top one is movable and connected to a
load cell. - *Platform size: 600×600 mm
*Displacement: 450 mm
*Capacity: 600 Kg,
*Data transfer system through RS 232
*Power required: 220 VAC, 50 Hz - *Model No: UCCST – 1000DM
SKU: *Model No: UCCST - 1000DM - This high quality compression strength tester is intended for testing
-
Strainers
Digital Bursting Strength Tester
- This instrument is used for determining the bursting strength of paper
& paperboard. The pressure is produced by electric motor and gear
mechanisms. Specimen is clamped between two concentric plates by
clamping wheel individually. Uniform pressure is produced and the
plunger reverses automatically after rupture and saves testing time
and increases diaphragm life. The bursting pressure, at the time of
rupture is recorded on a sensitive pressure gauge. - *Double head dual gauge individual clamping.
*Capacity: 0-7 Kg/cm2, 0-21 Kg/cm2, 0-35 Kg/cm2
*Power required: 220 VAC, 50 Hz - *Model No: UCBST- 721T
SKU: *Model No: UCBST- 721T - This instrument is used for determining the bursting strength of paper
-
Strainers
Smoothness Tester (Bendtsen Type)
- This instrument is used for testing the average smoothness, porosity
& softness of the paper and film by determining the time necessary
for a certain volume of air to flow through the inserted sample, - under
a uniform pressure. Electronic self started timer for automatic
measuring to pass through the test specimen - Attachment:
- *Template for specimen prepration
- *4.5 digit SSD timer
- *Power required: 220 VAC, 50 Hz
- *Model No: UCSPS – G
SKU: *Model No: UCSPS - G - This instrument is used for testing the average smoothness, porosity
-
Strainers
Thickness Micrometer (Bulk Tester
- The thickness of sheet is meas*Automatic dead weight with time control deviceured as distance between two
circular plane surface, under a steady pressure 2kg/cm2 (98.0Kpa)
for rapid and accurate measurement of thickness of paper & Paper
Board and Plastics. - *Motorized operated.
- *Automatic dead weight with time control device
- *Maximum thickness range: 10 mm
- *Resolution: 1 Micron/0.001 mm
- *Operating voltage: 220 VAC, 50 Hz
- *Model No: UCTMB – 10D
SKU: *Model No: UCTMB - 10D - The thickness of sheet is meas*Automatic dead weight with time control deviceured as distance between two
-
Strainers
Folding Endurance Tester (Kohier Mollin Type)
- The tester is used for measuring the no. Folds in paper, paper board &
films with a standard folding speed per minute. Folding endurance tester
with SSD counter measure the no. of double fold
and its hold when the paper break automatically. A test piece is fastened
vertically between two clamps. The upper clamp folds, the test piece by
means of the reciprocating circular motion while the lower clamp
maintain it under a given load. The loading clamps of dead weight type,
giving standard load of 800 gm - *Attachment: Die & punch strip cutter 15x100mm for specimen
- *Power required: 220 VAC, 50 Hz
- *Model No: UCFET- 200
SKU: *Model No: UCFET- 200 - The tester is used for measuring the no. Folds in paper, paper board &
